HPE/Cisco Policy-based route

Here is an example of Cisco PBR:

ip access-list extended ACL_NET192 deny ip host 192.168.10.1 172.16.0.0 0.0.0.255 deny ip host 192.168.11.0 0.0.0.255 172.16.0.0 0.0.0.255 permit ip host 192.168.10.1 any permit ip host 192.168.10.2 any deny ip any any ! route-map PBR_NET192 permit 10  match ip address ACL_NET192  set ip next-hop 1.1.1.1 ! interface Vlan192  ip policy route-map PBR_NET192 !

This is an example of the same PBR on HPE Comware:

acl number 3001 rule 10 permit ip source 192.168.10.1 0 destination 172.16.0.0 0.0.0.255 rule 20 permit ip source 192.168.11.0 0.0.0.255 destination 172.16.0.0 0.0.0.255 # acl number 3002 rule 10 permit ip source 192.168.10.1 0 destintion any rule 20 permit ip source 192.168.11.0 0.0.0.255 destintion any quit # policy-based-route PBR_NET192 deny node 5 if-match acl 3001 quit # policy-based-route PBR_NET192 permit node 10 if-match acl 3002 apply next-hop 1.1.1.1 quit # interface vlan 192 ip policy-based-route PBR_NET192 quit #

Tested on HP Comware v7.1.045 R2418P01 / HP 5900AF-48XG-4QSFP+