Here is an example of Cisco PBR:
ip access-list extended
ACL_NET192
deny ip host 192.168.10.1
172.16.0.0 0.0.0.255
deny ip host 192.168.11.0
0.0.0.255 172.16.0.0 0.0.0.255
permit ip host 192.168.10.1
any
permit ip host 192.168.10.2
any
deny ip any any
!
route-map PBR_NET192 permit
10
match ip address ACL_NET192
set ip next-hop 1.1.1.1
!
interface Vlan192
ip policy route-map PBR_NET192
!
|
This is an example of the same PBR on HPE
Comware:
acl number 3001
rule 10 permit ip source
192.168.10.1 0 destination 172.16.0.0 0.0.0.255
rule 20 permit ip source
192.168.11.0 0.0.0.255 destination 172.16.0.0 0.0.0.255
#
acl number 3002
rule 10 permit ip source 192.168.10.1 0 destintion any
rule 20 permit ip source
192.168.11.0 0.0.0.255 destintion any
quit
#
policy-based-route PBR_NET192 deny node 5
if-match acl 3001
quit
#
policy-based-route PBR_NET192 permit node 10
if-match acl 3002
apply next-hop 1.1.1.1
quit
#
interface vlan 192
ip policy-based-route
PBR_NET192
quit
#
|
Tested on HP Comware v7.1.045 R2418P01 / HP
5900AF-48XG-4QSFP+
